[REC MODE]

Switch the picture quality and recording format of the motion pictures to be recorded.

MENU : [RECORD SETUP] # [REC MODE] # desired setting

It is possible to set from the quick menu. (l 42)

[HA]/[HG]/[HX]/[HE]*1:

Set the recording mode to 1080/60i.

[1080/60p]*2:

Set the recording mode to 1080/60p.

[iFrame]*3:

Set the recording mode to iFrame.

[AVCHD 3D]*4:

Set the recording format to AVCHD 3D format, which can

 

record in 3D full high-definition image.

[SbS 3D]*4:

Set the recording format to side-by-side format (2 screen

 

structure), which can record in 3D image.

 

 

*1 Recording will have higher quality in the order of [HA], [HG], [HX] and [HE].

*2 It can record with highest quality image in this unit.

*3 [iFrame] is a format suitable for Mac (iMovie’11). It is recommended for when using a Mac. *4 This is displayed only when the 3D Conversion Lens (optional) is attached.

Recordable time using the battery (l 22)

This function’s default setting is [HG] mode.

Please refer to page 163 about approximate recordable time.

When the unit is moved a lot or moved quickly, or when a fast-moving subject is recorded (particularly when recording in [HE] mode), mosaic-type noise may appear at playback.

[TIME LAPSE REC]

A scene that moves slowly for long period of time is recorded frame by frame with an interval, and is recorded as a short time motion picture.

A frame is recorded with a set recording interval.

30 frames will make up motion picture of 1 second.

Set [ZOOM MODE] to [Opt.Zoom 12k]. (l 67)

Set [REC MODE] to [HA], [HG], [HX] or [HE].

MENU : [RECORD SETUP] # [TIME LAPSE REC] # desired setting

[OFF]:

Cancel the setting.

[1 SECOND]/[10 SECONDS]/[30 SECONDS]/[1 MINUTE]/[2 MINUTES]: Change the recording interval.

Switch to Manual Mode when the Interval Recording is set.

appears on the screen.

After recording, the setting of Interval Recording is canceled.

Audio cannot be recorded.

68

VQT4C76

Page 68
Image 68
Panasonic HC-X900M owner manual Time Lapse REC, Menu Record Setup # REC Mode # desired setting