160
VQT4C76
When disposing of or giving away the SD
card, note that:
Formatting and deletion of data on this
unit or computer only changes the file
management information and does not
completely delete the data in the SD card.
It is recommended that the SD card is
physically destroyed or the SD card is
physically formatted using this unit when
disposing of or giving away the SD card.
To physically format the SD card, connect
the unit via the AC adaptor, select
[SETUP] # [FORMAT CARD] # [YES]
from the menu, and then press and hold
the recording start/stop button on the
screen below for about 3 seconds. When
the SD card data deletion screen appears,
select [YES], and then follow the on-
screen instructions.
To physically format the SD card, connect
the unit via the AC adaptor, select
[SETUP] # [FORMAT MEDIA] # [SD
CARD] from the menu, and then press
and hold the recording start/stop button on
the screen below for about 3 seconds.
When the SD card data deletion screen
appears, select [YES], and then follow the
on-screen instructions.
The customer is responsible for the
management of the data in the SD card.
When the LCD monitor gets dirty, wipe it
with a soft cloth, such as eyeglass cleaner .
Do not touch the LCD monitor with your
fingernails, or rub or press with strong
force.
It may become hard to see or hard to
recognize the touch when the LCD
protection sheet is affixed.
In a place with drastic temperature
changes, condensation may form on the
LCD monitor. Wipe it with a soft cloth,
such as eyeglass cleaner.
When the unit has become very cold, for
example due to storage in a cold area, its
LCD monitor will be slightly darker than
usual immediately after the unit is turned
on. The normal brightness will be restored
when the unit’s internal temper ature rises.
About the SD card
HC-X800
HC-X900M
LCD monitor/viewfinder
Extremely high precision technology is
employed to produce the LCD Monitor
screen featuring a total of approximately
1,152,000 dots. The result is more than
99.99% effective dots with a mere 0.01%
of the dots inactive or always lit.
However, this is not a malfunction and
does not affect the recorded picture.
Extremely high precision technology is
employed to produce the viewfinder
screen featuring a total of approximately
263,000 dots equivalent. The result is
more than 99.99% effective dots with a
mere 0.01% of the dots inactive or always
lit. However, this is not a malfunction and
does not affect the recorded picture.
HC-X900M
HC-X900M&X800P&PC&PU-VQT4C76_mst.book 160 ページ 2012年1月11日 水曜日 午後10時6分