Panasonic HC-X900M Manual shutter speed/iris adjustment, To set the White Balance manually

∫To set the White Balance manually

1	Select	, fill the screen with a white subject.
2	Touch and set the blinking		.			MNL
≥ HC-X900M					FOCUS
					WB
	When using the viewfinder, press and hold the
					SHTR
	CAMERA FUNCTION button.				IRIS
≥ When the screen turns black instantly and the				display
	stops flashing and then lights constantly, the setting is
	complete.

≥If the display continues flashing, the White Balance cannot be set. In this case, use other White Balance Modes.

≥When the display flashes, the Manual White Balance previously adjusted is stored. Whenever recording conditions change, re-set the White Balance.

≥When setting both the White Balance and the iris/gain, set the White Balance first.

≥ AWB is not displayed on the screen when AWB is being set.

Manual shutter speed/iris adjustment

Shutter Speed:

Adjust it when recording fast-moving subjects.

Iris:

Adjust it when the screen is too bright or too dark.

≥HC-X900M

Press the iA/MANUAL button or the CAMERA FUNCTION button to switch to Manual Mode. (l 83)

For how to perform the settings when using the viewfinder, refer to page 84.

≥HC-X800

Press the iA/MANUAL button to switch to Manual Mode. (l 83)

1 Touch [SHTR] or [IRIS].

2 Touch / to adjust settings.

≥Touch [SHTR]/[IRIS] to complete the adjustments.

SHTR Shutter speed: 1/60 to 1/8000

≥If [AUTO SLOW SHTR (2D)] is set to [ON], the shutter speed will be set between 1/30 and 1/8000.

≥If [DIGITAL CINEMA] is set to [ON], the shutter speed will be set between 1/48 and 1/8000. (When [AUTO SLOW SHTR (2D)] is set to [ON], the range is 1/24 to 1/8000.)

≥The shutter speed closer to 1/8000 is faster.

≥The shutter speed will be set between 1/2 and 1/2000 in Still Picture Recording Mode.

IRIS Iris/Gain value:

CLOSE !# (F16 to F1.7) !# OPEN !# (0dB to 18dB)

≥Value closer to CLOSE darken the image.

≥Value closer to 18dB brighten the image.

85

VQT4C76