92
VQT4C76
Creating still picture from motion picture
A single frame from the recorded motion picture can be saved as a still picture.
3D still pictures are created from the scenes recorded in 3D, and 2D still pict ures ar e c reated
from the scenes recorded in 2D.
( (1920k1080) still pictures will be recorded for the AVCHD scenes and iFrame scenes,
and (640k360) still pictures will be recorded for the scenes saved in MP4.)
Press the button fully at the location to be saved as a still picture
during playback.
≥It is convenient to use Pause, Slow-motion Playback and Frame-by-frame Playback.
≥Date the motion picture was recorded will be registered as date of the still picture.
≥Quality will be different from the normal still picture.
Highlight & Time Frame Index
An image of one scene is displayed as a thumbnail at set search condition. Scene can be
played back from any midway point of the scene you wish to see.
≥Operate the zoom lever to side and change over
the thumbnail display to Highlight & Time Frame
Index. (l40)
1Touch .
≥To display the next (previous) page:
jSlide the thumbnail display upward (downward) while touching it.
jTouch (up)/ (down) on the thumbnail scroll lever.
2Touch the desired search condition.
[3 SECONDS]/[6 SECONDS]/[12 SECONDS]/[MINUTES]/[FACE]*/[HIGHLIGHT]*
* It is not displayed on iFrame scenes and scenes saved in MP4.
Playback
operation Playback display Operating steps
Direct playback
During Playback
Touch the Direct playback bar or slide
it while touching.
≥The playback pauses temporarily and
skips to the position touched or slid to
while touching.
≥Playback will start by releasing your
touching or sliding finger.
≥
Direct playback bar cannot be operated
with the remote control.
HC-X900M
2.1
M
0.2
M
HC-X900M&X800P&PC&PU-VQT4C76_mst.book 92 ページ ２０１２年１月１１日 水曜日 午後１０時６分