Panasonic HC-X900M owner manual Close the LCD monitor and retract the viewfinder

≥Change the mode to or . 1 Set [QUICK START] to [ON].

2 Close the LCD monitor and retract the viewfinder.

HC-X900M HC-X800



The status indicator A flashes green and the unit goes into Quick Start Standby Mode.

≥The lens cover does not close.

3 Open the LCD monitor or extend the viewfinder.

HC-X900M HC-X800

 

The status indicator A lights red and the unit is put into recording pause.

≥Quick Start Standby Mode is canceled if jabout 5 minutes elapsed

jmode is set to

≥Depending on the recording conditions and menu settings, time for Quick Start may be longer than 0.6 seconds.

≥It may take some time for Automatic White Balance to adjust.

≥In the Quick Start Mode, the zoom magnification becomes approx. 1k.

≥HC-X900M

If [ECONOMY (BATT)] (l 45)/[ECONOMY (AC)] (l 45) is set to [ON] and the unit automatically goes into Quick Start Standby Mode, close the LCD monitor and viewfinder and then open the LCD monitor or extend the viewfinder again.

HC-X800

If [ECONOMY (BATT)] (l 45)/[ECONOMY (AC)] (l 45) is set to [ON] and the unit automatically goes into Quick Start Standby Mode, close the LCD monitor and then open it again.

≥Turn the unit off using the power button.

≥HC-X900M

Quick Start Standby Mode cannot be released by the remote control.

46

VQT4C76