Panasonic HC-X900M Touch Exit to end the adjustment, Press the button to record still pictures. l

4 Touch [EXIT] to end the adjustment.

≥HC-X900M

Display of the LCD monitor is switched to 3D.

≥When re-attaching the 3D Conversion Lens or after an impact, etc., it is recommended that you perform the adjustment again.

5 (When recording motion pictures)

Press the recording start/stop button to start recording. (l 33)

≥Start recording after removing the Lens front cap.

≥[REC MODE] during recording the 3D will be [AVCHD 3D] or [SbS 3D]. (l 68)

(When recording still pictures)

Press the button to record still pictures. (l 35)

≥3D appears on the screen.

≥It is possible to record still pictures while recording motion pictures. (Simultaneous recording)

≥The number of recording pixels are 2.1M (1920k1080). (l 80)

∫HC-X900M

To switch the image during the recording to 2D (3D) display

≥Touch (left side)/ (right side) of on the Touch Menu to display ( ). (l 29)

≥ ( ) is displayed only when the 3D Conversion Lens (optional) is attached.

Touch ( ).

≥2D (3D) image will switch to 3D (2D) image.

≥It is possible to set from the menu. ([SETUP] # [2D/3D DISPLAY])

Q.

MENU

MENU

To ensure that the 3D image can be safely viewed, pay attention to the following points when recording.

≥Where possible, record with the unit in a horizontal state.

≥Do not get too close to the subject. (Record from a distance of at least 1.2 m (3.9 feet).)

≥When moving the unit as you record, move it slowly.

≥Try to hold the unit as steady as possible when recording while riding in a vehicle or walking.

≥Use of a tripod is recommended for recording with a stable picture.

≥HC-X900M

The reception range for the remote control might become narrow at the upper side of the unit, so operate from the lower side. (l 53)

≥[ECONOMY (BATT)]/[ECONOMY (AC)] will not work while you adjust the 3D Conversion Lens attachment position.

≥When the 3D Conversion Lens is attached, the auto slow shutter setting is [AUTO SLOW SHTR (3D)]. The default setting of [AUTO SLOW SHTR (3D)] is [ON]. (l 73)

≥While 3D recording if moving the unit fast, the message is more likely to appear.

≥HC-X800

The LCD monitor on this unit will not display in 3D.

≥If the unit is turned on with the lens cap attached in the shade etc., the screen may appear to be blue. In such a case, remove the lens cap to return the screen to normal.

89

VQT4C76