Panasonic HC-X900M Remote Control, REC Lamp, Alert Sound, Select Operation Icons, Touch Enter

HC-X900M[ON]/[OFF]

[REMOTE CONTROL]

Please refer to page 52.

[REC LAMP] [ON]/[OFF]

HC-X900M

The recording lamp lights up during recording and flashes when the unit receives a signal from the remote control or when the Self-timer is counting down.

HC-X800

The recording lamp lights up during recording and flashes when the Self-timer is counting down.

When this is set to [OFF], it does not light during recording.

[ALERT SOUND] / /[OFF]

Touch screen operation, starting and stopping of recording and unit on/off can be confirmed with this sound.

(Volume low)/ (Volume high)

2 Beeps for 4 times

When an error occurs, follow the instructions displayed on the screen. (l 150)

[SELECT OPERATION ICONS]

You can change the operation icons displayed in the Touch Menu.

Register 3 favorite operation icons.

≥This function’s default settings are (Fade), (PRE-REC) and (Backlight

Compensation) for Motion Picture Recording Mode, and (Built-in flash),

(Self-timer) and (Backlight Compensation) for Still Picture Recording Mode.

1Touch [SELECT OPERATION ICONS].

2Touch the operation icon you would like to change to cancel the setting.

3Touch the operation icon to be set.

≥Name of the function is displayed by touching and holding on the operation icon.

≥To cancel, touch the operation icon again.

4 Touch [ENTER].

≥For details about the function of each operation icon, refer to page 60.

47

VQT4C76