Setup time

 

 

Setup example

(recording

Recording time

Recorded time

 

interval)

 

 

Sunset

1 s

Approx. 1 h

Approx. 2 min

 

 

 

 

Blooming

30 s

Approx. 3 h

Approx. 12 s

 

 

 

 

Maximum recordable time is 12 hours.

Still picture recording cannot be used.

Recording mode cannot be changed when the Interval Recording is set.

If you turn off the unit or change the mode to , this function is canceled.

The shortest motion picture recording time is 1 second.

Color balance and focus may not be adjusted automatically depending on light sources or scenes. If so, manually adjust these settings. (l 84, 86)

[DIGITAL CINEMA]

Use this function to record an image with vivid color, like an image on a movie film.

Switch to Manual Mode. (l 83)

Set [ZOOM MODE] to [Opt.Zoom 12k]. (l 67)

Set [REC MODE] to [HA] or [HG]. (l 68)

MENU : [RECORD SETUP] # [DIGITAL CINEMA] # [ON]

The shutter speed is 1/48 or more. (When [AUTO SLOW SHTR (2D)] is [ON], it is 1/24 or more.)

The images may not appear smooth.

HC-X900M

[RELAY REC]

It is possible to continuously record motion picture to an SD card when there is no space available in the built-in memory. (It allows you to record only to SD card from built-in memory.)

Set [MEDIA SELECT] to [Built-inMemory].

Set [REC MODE] to [HA], [HG], [HX], [HE] or [1080/60p]. (l 68)

Insert an SD card.

MENU : [RECORD SETUP] # [RELAY REC] # [ON]

is displayed on the screen. will disappear when space in the built-in memory is gone and the recording to the SD card starts.

Relay Recording can only be performed once.

Combine the scenes that were relay-recorded using the [RELAY SCENE COMBINE] into the SD card. (l 107, 121)

Once you have performed [RELAY SCENE COMBINE], you can use the Relay Recording function again. If the [RELAY REC] is set to [ON] without performing the [RELAY SCENE COMBINE], a message is displayed. You will be able to perform Relay Recording by

69

VQT4C76

Page 69
Image 69
Panasonic HC-X900M owner manual Menu Record Setup # Digital Cinema # on, Menu Record Setup # Relay REC # on