Tektronix 071-0590-00 Dataampup v and dataampdn, Dataampl?, Dataoffup and dataoffdn

Remote Commands

Min. Abbr.	data_amp_u
	data_amp_d
Arguments	none
Example	data_amp_dn

data_amp_up [v] and data_amp_dn [v]

Data Amplitude Up, Data Amplitude Down. This command pair is used to increment or decrement the current amplitude of the Generator data output by a specified step size of [v] volts.

Min. Abbr.	data_amp_u
	data_amp_d
Arguments	v:	<NR2>, in the range 0.05 to 1.50, in steps of 0.05.
Example	data_amp_up 1.00

data_ampl [v]

Data Amplitude. Sets the amplitude of the Generator's data output signal to [v] volts.

Min. Abbr.	data_ampl
Arguments	v:	<NR2>, in the range 0.50 to 2.00 in steps of 0.05.
Example	data_ampl 1.00

data_ampl?

Data Amplitude Query. Returns the current amplitude setup of the Generator's data output signal.

Min. Abbr.	data_ampl?
Returns	<NR2>
Example	data_ampl?	(command)
	DATA_AMPL 1.00	(response)

data_off_up and data_off_dn

Data Offset Up/Down (Default). This command pair is used to increment or decrement the current baseline offset of the Generator data output by a default amount of 0.05 volts.

GB1400 User Manual C-43