Tektronix 071-0590-00 user manual Clockfreq?, Clockmemory?

Remote Commands

Generator Commands

The following commands are found only in the Generator command set.

Clock Source and Frequency Setup Commands

clock_freq [v]

Clock Frequency. Sets the clock frequency to a value [v], specified in Hz, over the range of 1 MHz to 1405 MHz in steps of 1kHz.

Min. Abbr.	clock_f
Arguments	v	<NR3>, in the range 1.000E+6 to 1405.000E+6 in steps
	of 0.001E+6.
Example	clock_freq 622.000E+6.

clock_freq?

Clock Frequency Query. Returns the current Generator clock frequency setting.

Min. Abbr.	clock_f
Returns	<NR3>
Example	clock_freq?	(command)
	CLOCK_FREQ 0.150E+6	(response)

clock_memory?

Clock Memory Query. Returns the contents of all ten frequency memory locations. The response will be 10 message units separated by semi-colons ";", and will contain the memory location and frequency.

Returns	<NR1 Numeric>
	<NR3 Numeric>

C-36 GB1400 User Manual