Compact Disc

Handing the Discs:

This unit has been designed specifically for sound

reproduction from compact discs bearing the mark.

AUDIO

No other discs can be used.

1. Always place the compact disc in the disc tray with the label facing upward. (Compact discs can be played only on one side).

2.To remove a disc from its storage case, press down on the centre of the case and lift the disc out, holding it

carefully by the edge.

HANDLE DISC ONLY AS SHOWN

3. Fingermarks and dust should be carefully wiped off the disc recorded surface with a soft cloth (not included)

CLEAN FROM CENTER TO EDGE

Preparation of Use

1. Connect the AC power cord.

2.The silver screw protects the phonograph chassis during transportation. If the speed of your phonograph seems slow or you hear a rubbing sound, adjust the screw with a coin to correct the balance of the turntable.

4.Never use such chemicals as record sprays, anti-static sprays or fluid, benzine or thinner to clean compact discs. Such chemicals will do irreparable damage to the disc's plastic surface.

5.Discs should be return to their cases after use to avoid serious scratches that could

cause laser pickup to skip.

6. Do not expose discs to direct sunlight or high humidity and temperature for extended periods. Long exposure to high temperature can warp the disc.

7.Do not stick paper or write anything with a ballpoint pen on the surface of the label side.

8.Do not use irregular shaped CD's (octangonal, heart-shape, etc.) Which can damage the

unit.

How To Replace The Turntable Stylus?

Removing old stylus

1.Set a screwdriver at the tip of the stylus and push down to the direction "A".

2.Remove the stylus by pulling it forward and down.

Installing a new stylus

1.Hold the tip of the stylus and insert the other edge by pressing in the direction "B".

2.Push up in the direction "C" until it locks at the tip.

A

C

6

B

Guide Pins (inside)

7

Page 3 Page 5
Page 4
Image 4
Curtis RCD836 important safety instructions Preparation of Use, Compact Disc, How To Replace The Turntable Stylus?
Page 3 Page 5

RCD836 specifications

The Curtis RCD836 is a highly sophisticated, compact, and versatile motor controller specifically designed for electric vehicles (EVs), golf carts, and other applications requiring efficient power management. This controller stands out due to its ability to handle high power while maintaining a compact form factor, making it suitable for a wide range of electric drive systems.

One of the most significant features of the Curtis RCD836 is its advanced regenerative braking capability. This feature allows the vehicle to recapture energy during braking and feed it back into the battery system, enhancing overall energy efficiency and extending the range of the vehicle. This is particularly beneficial for applications such as golf carts and mobility scooters, where extended battery life is crucial.

In terms of performance, the RCD836 supports a variety of driving modes, providing users with options that suit their operational needs. This flexibility is essential for different environments, whether navigating hilly golf courses or flat urban areas. The controller supports customizable speed profiles, allowing for tailored acceleration and deceleration characteristics, which enhances the driving experience.

The Curtis RCD836 employs advanced microcontroller technology, ensuring rapid response times and efficient processing. This microcontroller architecture allows for sophisticated control algorithms that can optimize motor performance and improve the overall efficiency of the system. Additionally, it features built-in diagnostics, which make troubleshooting easier and enhance reliability.

Another characteristic worth noting is its robust design, which includes features such as IP65 rating for dust and water resistance. This durability ensures that the controller can withstand harsh environmental conditions, making it suitable for outdoor applications.

The RCD836 is also designed with user-friendly integration in mind, featuring various communication options, including CANbus and PWM inputs. This allows for easy integration with other vehicle systems, such as displays and telemetry equipment.

Overall, the Curtis RCD836 is a cutting-edge motor controller that combines efficiency, performance, and reliability. Its advanced features such as regenerative braking, customizable driving modes, and robust design make it an ideal choice for anyone looking to enhance the performance and longevity of electric vehicles and other battery-operated systems.
Top Page Image Contents