Tektronix 071-0590-00 user manual RS-232C Error Messages

Using GPIB, RS-232

RS-232C Error Messages

All RS-232C remote commands received by the GB1400 are checked for command validity and appropriate parameters (parameters listed with commands within brackets [ ]). All valid command strings are executed. Incorrect command strings are responded to with error messages

Error Message		Error
“***	Input Lost”	Input data lost over interface
“***	Input Buffer Overflow”	Input buffer overflow, command line
		too long without terminator
“***	Command Mnemonic Not	Command not found
	Found”
“***	Invalid Command for Interface”	Command found, but not valid for this
		interface
“***	Invalid Command Type”	Command mnemonic found, but
		command issued incorrectly: missing,
		or added, '?' on end of command
“***	Too Few Parameters”	Missing parameter
“***	Too Many Parameter”	Too many parameters or training
		garbage at end of command
“***	Invalid Parameters”	Parameter invalid
“***	Parameter Out of Range”	Parameter out of range
“***	Parameter Not in Set”	Parameter not one of the values
		specified for the command
“***	Invalid String Length”	Parameter string too long
“***	Parameter Separator”	Parameter separator, ‘;’, is missing or
		command line is terminated following
		separator
“***	Command Execution Error”	Command not executed properly
“***	Out of Memory”	Processor out of memory
"***	Invalid Hexadecimal Parameter	Parameter not in hexadecimal format
		or more than two hexadecimal
		characters

GB1400 User Manual D-11