Tektronix 071-0590-00 user manual Datainvert onoff, Datainvert?, Datapattern prbs word rdata

Remote Commands

Commands Shared by the Generator and Analyzer

Except where noted, the following commands are found in both the Generator and Analyzer command sets.

Pattern and Word Commands

Use these commands to select a pattern, enable or disable pattern inversion, create and save word patterns, and perform related pattern functions.

data_invert [onoff]

Data Inversion. Returns current status of Output Data Polarity. This command enables or disables logical inversion of the Generator data output bit sequence or the Analyzer input bit sequence.

Min. Abbr.	data_inv
Arguments	on:	enables data inversion, outputs inverted data
	off:	disables data inversion, outputs true data
Example	data_invert off

data_invert?

Data Inversion Query. Returns a character string indicating whether Generator output data inversion or Analyzer input data inversion is enabled (on) or disabled (off).

Min. Abbr.	data_inv?
Returns	[onoff]
Example	data_invert?	(command)
	DATA_INVERT OFF

data_pattern [prbs word rdata]

Data Pattern. Sets the Generator pattern mode to PRBS or word, or the Analyzer pattern mode to PRBS, word, or reference data.

Min. Abbr.	data_p
Arguments	prbs :	selects the PRBS pattern mode.
	word:	selects the word pattern mode.

rdata: selects the reference data mode (Analyzer only).

GB1400 User Manual C-19