Tektronix 071-0590-00 user manual Saving a Frequency, Recalling a Frequency

Reference

3.Press the clock section up/down keys to increment or decrement the current frequency using the previously selected step size. Note that the underscore position indicates a step size, not which digit will be edited. For example if displayed frequency is 622.950, and the cursor is under the "9", then step size is 100 kHz and pressing the up (−) key one time will change frequency to 623.050 MHz.

Saving a Frequency

You may save the current Generator frequency into one of 10 frequency memory locations as follows:

1.Press the clock SAVE key. Verify that the SAVE LED is flashing.

2.Press the clock section up/down keys to select the desired memory location . Note that frequency memory location is displayed in the bottom left field of the display as FREQ x, where x = 0, 1, ..., 9.

3.Then press SAVE a second time to save the current frequency into this location. Verify that the clock SAVE key LED turns off.

Recalling a Frequency

You can recall a previously saved frequency as follows:

1.Press the clock RECALL key and verify that the RECALL LED turns on.

2.Press the clock up/down keys until the display shows the desired frequency (top left) and frequency memory location (bottom left).

NOTE: The displayed frequency becomes the current frequency immediately. That is, you do not have to hit RECALL again.

GB1400 User Manual 3-11