Kyocera TASKalfa3550ci manual On the Installation Method page, click Express Mode, Print a test

Installation

2

3

4

5

6

On the Installation Method page, click Express Mode.

The Discover Printing System page opens, searching for your printing system.

If Discover finds your printing system, select your model from the list and click Next.

If Discover does not find your printing system, a message appears. Remove and reinsert the USB or network cable, and ensure it is connected properly. Click Refresh to retry the discovery. If the system still cannot find your printing system, contact your system administrator.

Select Use host name for port name to use a host name for the Standard TCP/IP port. If the installation wizard still displays the IP address, contact your system administrator. (Not available with a USB connection.)

Click Information if you want to open a dialog box with details about IP Address, Host Name, Printer Model, Contact, Location, and Serial Number. Click OK. Click Next. (Not available with a USB connection.)

On the Printer Settings page, you can assign a name to your printing system.

Note: With a first time USB connection, the Printer Settings page does not appear.

You can also choose to share this printer with others or set this printer as the default printer. Make your selections, and then click Next.

7

8

On the Confirm Settings page, click Install if the settings are correct. Click Back to correct the settings.

The Installation Completed page appears displaying the following driver options.

Print a test page

This selection verifies a connection with the printer and creates a print out of the installed driver components.

Enable Status Monitor

The Status Monitor displays system status messages on your computer screen during printing tasks. The Status Monitor button appears on the Advanced tab.

Show Quick Print Tab

This selection lets you define basic print options into group profiles that can be accessed easily. The Show Quick Print tab option also appears in the Administrator Settings in Device Settings.

Device Settings

Select the Device Settings check box to open Device Settings where you can choose installed options for your printing system. (The Device Settings check box appears only in Windows XP with a network connection.)

When the installation completes successfully, click Finish to exit the installation wizard.

A message may appear if there is a software installation failure.

KX DRIVER 1-3