Kyocera TASKalfa5550ci, TASKalfa6550ci manual Auto Configure, Memory, Enabling Auto Configuration

Device Settings

Auto Configure

Auto Configure detects the devices installed on the printing system if it is connected over a network. Auto Configure can detect printing system devices such as input devices. When your computer is connected to the printing system through a TCP/IP or WSD port, the Auto Configure button appears in Device Settings. Auto Configure updates the Device options list, Memory, and preview images to keep the printer driver consistent with the printing system configuration.

Not all installed devices are detected by using Auto Configure. Before selecting OK in Device Settings, check the settings to make sure that they are correct.

Note: The default setting for Windows XP Service Pack 2 is for the Windows Firewall to be set to On. The setting can be changed to allow communication between the printing system and your computer. In the Windows Security Alert dialog box, click Unblock.

Silent Auto Configuration

Silent auto configuration checks the printing system every 10 minutes for changes in optional devices or memory. When a change is detected, the driver is automatically updated with the new settings. Silent auto configuration is only available for printing systems installed in Windows 7 or Windows Vista.

In a client/server environment, this feature is unavailable to a client logged in as a restricted user.

Enabling Auto Configuration

1

2

The Auto Configure button can be used to detect all available device options when the printing system is connected to a network through a TCP/IP port.

Verify that all optional devices are attached to the printing system, and that it is turned on and ready to print.

In Device Settings, click Auto Configure.

In Windows XP, the driver settings are updated immediately.

In Windows 7 and Windows Vista, the Auto Configure dialog box opens. Select from Auto configure options:

Auto Configure Now

Click the button at any time to retrieve the current settings from the printing system. It is recommended to do this when the driver is first installed and when Silent auto configuration is turned off.

Silent auto configuration

Select to let the driver check the printing system every 10 minutes for any changes in optional devices or memory. When a change is detected, the driver is automatically updated with the new settings.

Memory

This feature displays the amount of memory in the printing system.

2-3 User Guide