Kyocera TASKalfa4550ci Custom Installation, On the Installation Method page, select Custom Mode

Installation

Click Finish, and retry the installation. If the same message appears again, contact your system administrator.

The installation of the printer is now complete. If prompted, restart your computer.

Custom Installation

Custom Mode applies to driver installation for a USB or network connection. The installation wizard can discover printers that are turned on, and connected by USB and network cable, or you can manually select the driver from drivers that are available. You can specify the printer port, fonts, and the utilities you want to install.

Printer drivers that ship with Windows operating systems are called minidrivers. The minidriver is available separately for PCL and KPDL and provides basic support for your printer.

The KX XPS DRIVER is only available for printing systems used with Windows 7 and Windows Vista. The XPS driver is discussed in the Device Settings chapter. Minidriver functionality is not documented in this user guide.

Installing in Custom Mode with a Network Connection using

Discover

1

2

3

This section describes the custom installation procedure of the driver software in Windows operating systems using a network connection.

Ensure that your printer and computer are connected to a network.

On the Installation Method page, select Custom Mode.

The Discover Printing System page opens searching for your printing system. The Discover button is automatically selected. A list of models appears. Click Next.

If Discover does not find your printing system, a message appears. Remove and reinsert the network cable, and ensure it is connected properly. Click Refresh to retry the discovery. If the system still cannot find your printing system, contact your system administrator.

4

5

6

On the Custom Installation page, select the driver and software packages you want to install from the Driver and Utility tabs, and clear those not intended for installation. Click Next.

If you only select software packages from the Utility tab, you will skip to the Confirm Settings page.

On the Printer Settings page, you can assign a name for your printing system. You can also choose to share this printer with others or set this printer as the default printer. Make your selections, and then click Next.

On the Confirm Settings page, click Install if the settings are correct. Click Back to correct the settings.

Note: If the Hardware Installation warning dialog box appears, click Continue.

1-4 User Guide