WARNING: TO REDUCE RISK OF PERSONAL INJURY - UNPLUG CLEANER BEFORE SERVICING
PROBLEM | POSSIBLE REASON |
Cleaner won't 1. | Power cord not firmly |
run | plugged into outlet. |
2. | Blown fuse or tripped breaker. |
3. | Needs service. |
POSSIBLE SOLUTION
1.Plug unit in firmly.
2.Check fuse or breaker. Replace fuseheset breaker.
3.Take to service center or call
|
|
|
| |
Cleaner won't | 1. | Dirty water tank door not | 1. | Insert dirty water tank door. |
|
| installed. |
|
|
suction | 2. | Dirty water tank is not | 2. | Review Dirty Water Tank Removal |
|
| installed correctly. |
| and Replacement - Pg. 9. |
| 3. | Dirty water tank is full. | 3. | Empty Dirty Water Tank - Pg. 9. |
| 4. | Dirty water passage | 4. | Clean Dirty Water Tank - Pg. 9. |
|
| clogged. |
|
|
Water escaping from cleaner
Cleaner won't dispense solution
1.Dirty Water Tank is full.
2.Dirty Water tank not installed correctly.
3.Solution reservoir not installed properly.
1.Solution reservoir not installed properly.
2.Needs service.
1.Empty Dirty Water Tank - Pg. 9.
2.Review Dirty Tank Removal and ~eplacement- Pg. 8,9.
3.Review Solution Reservoir Installation
-Pg. 7.
1.Review carpet cleaning - Pg. 8.
2.Take to service center or call
ANYOTHERSERVICINGSHOULDBEDONEBYAN AUTHORIZED SERVICE REPRESENTATIVE
CUSTOMER SERVICE (1-800-321-1134)
In the event that further assistance is required, see your Yellow Pages for an authorized Royalm Dealer. Costs of any transportation to and from any place of repair are to be paid by the owner. The service parts used in this unit are easily replaced and readily available from an authorized RoyaleDealer or retailer. Always identify your cleaner by the model number and manufacturing code when requesting information or ordering replacement parts. (The model number appears on the bottom of the cleaner.)