Unscrew measuring cap from back side of solution reservoir.
Place bottom of solution reservoir into cleaner and rotate top into position until the lever snaps into place.
Fill measuringcap with solution 2 times (approximately 4 oz) and pour into clean water tank. NOTE: Use only Dirt Devil" Carpet & Rug Shampoo. Using other cleaning solutions may cause excessive foaming. kcessive foam will cause the float to shut off the vacuumpre- maturely. Using other cleaning solutionswill voidyourwanan@
Plug cord into electrical outlet. Step onto handle release pedal to put into cleaning position.
Fill remaining solution reser- voir with hot tap water. Replace cap.
NOTE: Never leave unit mat- tended with power on. Turn OFF when empiyingand filing reservoir. Do NOT oversatu- rate the carpet. Turn power switch to the "on" position.
IMPORTANT: FOR BEST CLEANING RESULTS USE A STEADY, MODERATE, FORWARD AND BACKWARD MOTION. While depressing solution spray trig- ger, pull unit in backward motion. Release trigger and push unit forward in same path to remove dirty water and solution from carpet. (For heavily soiled areas, repeat if necessary)(See page 8). IMPORTANT: IF THE SOUND OF THE MOTOR CHANGES TO A HIGH PITCH, THIS INDICATES THE DIRTY WATER TANK IS FULL AND MUST BE EMPTIED. A VISUAL INDICATOR IS WHEN THE BLUE FLOAT HAS RISEN TO THE TOP OF THE DIRTY WATER TANK.
