PLACING DIRTY WATER TANK IN BASE OF CLEANER:
Lift front base of cleaner off carpeting with one hand.
While making sure the front of the dirty water tank is rest- ing on the base, place the rear of the tank into the base of the cleaner. Push handle down until it latches (Diagram8). NOTE: Do not store cleaner with solution in reservoir or dirty water in dirty water tank Mineral deposits and mildew can form which willaffecttheperformance of your Featherlitee Carpet Shampooer.
Grasp handle and hook front of dirty water tank into base of cleaner, making sure front of dirty water tank is resting on the base (Diagram 2). The Dirty Water Tank has 3 tabs on the underside which MUST latch into the underside of the base of the cleaner. It is very important to lift the base of the cleaner off of the carpeting and hook the nozzle to the base so that the nozzle is flush with the base of the cleaner (Diagram 2a). Failure to install the Dirty Water Tank correctly (Diagram 2b), will result in poor dirty water pickup. The Dirty Water Tank will need to be emptied once or twice per fill up of the Clean Water Tank.
