Kyocera TASKalfa6550ci, TASKalfa7550ci, TASKalfa5550ci, TASKalfa3550ci, TASKalfa4550ci Print a test

Installation

4

5

On the Custom Installation page, select the driver and software packages you want to install from the Driver and Utility tabs, and clear those not intended for installation. Click Next.

If you only select software packages from the Utility tab, you will skip to the Confirm Settings page.

On the Printer Settings page, you can assign a name to your printing system.

Note: With a first time USB connection, the Printer Settings page does not appear.

You can also choose to share this printer with others or set this printer as the default printer. Make your selections, and then click Next.

6

7

On the Confirm Settings page, click Install if the settings are correct. Click Back to correct the settings.

Note: If the Hardware Installation warning dialog box appears, click Continue Anyway.

The Installation Completed page appears displaying the following driver options.

Print a test page

This selection verifies a connection with the printer and creates a print out of the installed driver components.

Enable Status Monitor

The Status Monitor displays system status messages on your computer screen during printing tasks. The Status Monitor button appears on the Advanced tab.

Show Quick Print Tab

This selection lets you define basic print options into group profiles that can be accessed easily. The Show Quick Print tab option also appears in the Administrator Settings in Device Settings.

When the installation completes successfully, click Finish to exit the installation wizard.

A message may appear if there is a software installation failure.

Click Finish, and retry the installation. If the same message appears again, contact your system administrator.

The installation of the printer is now complete. If prompted, restart your computer.

Installing in Custom Mode with a Network Connection using Custom Select

1

2

This section describes the custom installation procedure of the driver software in Windows operating systems using a network connection.

Ensure that your printer and computer are connected to a network.

On the Installation Method page, select Custom Mode.

1-6 User Guide