Fujitsu FTP-627MCL113 manual FTP-627MCL103/113, n SPECIFICATIONS

FTP-627MCL103/113

nSPECIFICATIONS

	Item	Specification
		FTP-627MCL103	FTP-627MCL113
Interface		Conforms to RS232C / Centronics
	For print head	24 VDC ±5%, 1.0 A average (1.5A peak)
		24V, 25% printing ratio
Operating
	For motor	24 VDC, 1 A maximum
Voltage
	For logic	5 VDC ± 5%, 0.1 A maximum
Dimensions	Printer mechanism	72.4 x 33.0 x 15.5 mm (WxDxH)	75.0 x 33.4 x 15.5 mm (WxDxH)
	Interface board	70 x 60 x 24 mm (WxDxH)
Weight	Mechanism	Approximately 42g	Approximately 54g
	Interface board	Approximately 25g
		Pulse resistance: 50 million pulses/dot (under our standard
Life	Head	conditions). Abrasion resistance: paper traveling distance 50km
		(print ratio: 25% or less)
	Platen open	5,000 times
	Operating temperature	0˚ C to +50˚ C*1
Operating	Operating humidity	20 to 85% RH (no condensation)
environment	Storage temperature	-20˚ C to +60˚ C (paper not included)
	Storage humidity	5 to 95% RH (no condensation)
	Head temperature	Detected by thermistor
	detection
Detection
	Paper out/mark detection	Detected by photo-interrupter
function
	Platen release detection	Detected by slide switch (103/383 only)
		High Sensitive Paper	TF50KS-E4 (Nippon Paper)
		Standard paper:	TF60KS-E(Nippon Paper),
			FTP-020PU001 (58mm),
			PD105R (Oji Paper), FTP-
			020P0701 (58mm)
Recommended thermal sensitive paper		Medium Life Paper	TF60KS-F1, FTP-020P0102
			(58mm), PD170R (Oji Paper),
			P220VBB-1 Mitsubishi Paper)
		Long Life Paper	PD160R-N (Oji Paper),
			AFB-235 (Mitsubishi Paper),
			TP50KJ-R (Nippon Paper),
			HA220AA (Nippon Paper)
*1: printing density assurance range, operation is possible at -25˚C to +70˚C