Kyocera TASKalfa7550ci manual Tri-Fold, Offset Jobs, Printing with Bi-Fold, Offsetting Jobs

Finishing

2

3

4

5

Select a number of copies greater than 1.

In Finishing > Separation, select Rotate copies.

Click OK to return to the Print dialog box.

Click OK to start printing.

Offset Jobs

The Offset jobs feature physically shifts each print job in the output tray.

To ensure consistent offset stacking, all users printing to the same printing system should select Offset jobs as the default setting.

The Offset jobs feature requires a finishing device to be selected under Device options in Device Settings. It does not work with the Staple or the Finishing edge features.

Offsetting Jobs

You can offset, or shift each print job in the output tray.

1

2

3

4

Bi-Fold

In Basic > Destination, select an option that is available for the finisher you selected in Device Settings > Device options. Selections vary according to printing system model.

In Finishing > Separation > Offset jobs.

Click OK to return to the Print dialog box.

Click OK to start printing.

The Bi-Foldfeature lets you produce a document folded in half, like a brochure or a pamphlet. Printing occurs on the outside of your document. You can also select the number of pages produced as output.

Printing with Bi-Fold

1

2

3

With a folding unit installed, you can create a folded document.

In the Finishing tab, select Bi-Fold.

In Number of sheets, type or select the number of sheets that will be folded in half, up to a maximum of 5.

Click OK.

Tri-Fold

The Tri-Foldfeature lets you produce a document folded into thirds, like a brochure or a pamphlet. You can choose to print on the inside or the outside of

KX DRIVER 6-2