NETGEAR M7100, M4100 manual Subnet Mask field, enter

ProSafe M4100 and M7100 Managed Switches

•In the Subnet Mask field, enter 255.255.255.0.

•In the Admin Mode field, select Enable.

d.Click Apply to save the settings.

4.Specify the router ID, and enable OSPF for the switch.

a.Select Routing > OSPF > Basic > OSPF Configuration. A screen similar to the following displays.

b.Under OSPF Configuration, in the Router ID field, enter 2.2.2.2.

c.Click Apply to save the settings.

5.Enable OSPF on port 2/0/11.

a.Select Routing > OSPF > Advanced > Interface Configuration. A screen similar to the following displays.

b.Scroll down and select the interface 2/0/11 check box. Now 2/0/11 appears in the Interface field at the top.

•In the OSPF Area ID field, enter 0.0.0.0.

•In the OSPF Admin Mode field, select Enable.

c.Click Apply to save the settings.

6.Enable OSPF on port 2/0/19.

a.Select Routing > OSPF > Advanced > Interface Configuration.

110 Chapter 7. OSPF