NETGEAR M7100 CLI Set up a MAC ACL with Two Rules, Web Interface Set up a MAC ACL with Two Rules

ProSafe M4100 and M7100 Managed Switches

CLI: Set up a MAC ACL with Two Rules

1.Create a new MAC ACL acl_bpdu.

(Netgear Switch) # (Netgear Switch) #config

(Netgear Switch) (Config)#mac access-list extended acl_bpdu

2.Deny all the traffic that has destination MAC 01:80:c2:xx:xx:xx.

(Netgear Switch) (Config-mac-access-list)#deny any 01:80:c2:00:00:00 00:00:00:ff:ff:ff

3.Permit all the other traffic.

(Netgear Switch) (Config-mac-access-list)#permit any (Netgear Switch) (Config-mac-access-list)#exit

4.Apply the MAC ACL acl_bpdu to port 1/0/2.

(Netgear Switch) (Config)#interface 1/0/2

(Netgear Switch) (Interface 1/0/2)#mac access-group acl_bpdu in

Web Interface: Set up a MAC ACL with Two Rules

1.Create MAC ACL 101 on the switch.

a. Select Security > ACL > MAC ACL.

A screen similar to the following displays.

b.In the Name field, enter acl_bpdu.

c.Click Add to create ACL acl_bpdu.

2.Create a new rule associated with the ACL acl_bpdu.

a.Select Security > ACL > MAC ACL > MAC Rules.

170 Chapter 10. ACLs