Fujitsu FMW4503TS128A01 manual Boot Menu Options, Boot Device Priority Submenu

Boot Menu Options

Boot menu options are described in Table 3-16.

Table 3-16. BIOS Setup Boot Menu Options

Option	Settings	Description
QuickBoot	Disabled	Determines whether the full set of tests are run
	Enabled	during the Power-On Self Test (POST).
	Auto
		When [Enabled] is selected, a less extensive
		memory test is performed and the size of installed
		memory is not displayed during the memory test.
		When [Auto] is selected, diagnostic tests will either
		be skipped or performed according to the order of
		the ACPI OS.
		When [Disabled] is selected, the full set of tests is
		run.
Boot Time Diagnostic Screen	Disabled	Determines whether status messages are displayed
	Enabled	as the Power On Self Test (POST) is performed.
		Select [Enabled] to display messages.
		If [Disabled] is selected, messages are not displayed
		and the logo screen is displayed. (If POST errors
		occur, POST messages are displayed regardless of
		this setting.)
Preboot Execution	Disabled	Determines whether the boot up from a network
Environment	Enabled	server.
		Select [Enabled] to allow the system to boot from a
		network server (Preboot Execution Environment).
		If [Disabled] is selected, this feature is disabled.
Boot Device Priority Submenu		Select this submenu to configure the order in which
		drives are searched for a bootable image.

Boot Device Priority Submenu

Table 3-17.describes settings in the Boot Device Priority submenu.

Table 3-17. BIOS Setup Boot Sequence Submenu

	Setting	Description
1.	[Floppy Disk Drive]	Determines the order that the systems searches
2.	[Hard Disk Drive]	drives for a bootable image.
1.	[Hard Disk Drive]	Tap on item 2 to change the boot sequence.
2.	[Floppy Disk Drive]

BIOS Setup 24