Fujitsu FMW4503TS128A01 manual Removing a Dimm Card

Removing a DIMM Card

To remove a DIMM card,

1.Ensure that the pen tablet is off. To do so, carry out the Shut Down command in the Start menu. (Do not attempt to remove or install a DIMM card when the system is in Suspend mode or running.)

2.Remove the screws from the cover plate on the back of the pen tablet and remove the cover plate as shown in Figure 4-2.

3.Spread the fingers on the socket that lock the DIMM card in place until the DIMM card is loose. Reference Figure 4-3.

4.Remove the DIMM card from the socket.

5.Reinstall the cover plate if you are not installing a new DIMM card.

The DIMM card is now removed from the pen tablet. Refer to “Installing a DIMM Card” on page 36 if you are installing a new DIMM card.

Figure 4-3 Removing a DIMM Card

Removing a DIMM Card 37