Fujitsu FMW4503TS128A01 manual AT Fax Class1 Commands, Modulation by parameter

AT Fax (Class1) Commands

Command		Specification	Default
+FCLASS	?	Service class indication (*1)
	=n	Service class selection (*2)	3
	=?	Service class capabilities (*2)
+FTS	=n	Transmission silence (n=0-255, 10ms intervals)
+FRS	=n	Receive silence. (n=0-255, 10ms intervals)
+FTM	=n	Transmit FAX data with <n> carrier.
	=?	Transmit FAX modulation. (*3)
+FRM	=n	Receive FAX with <n> carrier.
	=?	Receive FAX modulation. (*3)
+FTH	=n	Transmit HDLC data with <n> carrier.
	=?	Transmit HDLC data modulation (*3).
+FRH	=n	Receive HDLC data with <n> carrier.
	=?	Receive HDLC data modulation. (*3).

*1:	000 ->	Data mode	*2:	0	->	Data mode
	001 ->	Facsimile Class 1		1	->	Facsimile Class 1
	008 ->	Voice Mode		8	->	Voice Mode
	080 ->	VoiceView Mode (not supported)		80	->	VoiceView Mode (not supported)
*3:	Modulation by parameter
	3:	V.21 Channel2	300bps
	24:	V.27ter	2400bps
	48:	V.27ter	4800bps
	72:	V.29	7200bps
	73:	V.17	7200bps (long
	74:	V.17	7200bps (short)
	96:	V.29	9600bps
	97:	V.17	9600bps (long
	98:	V.17	9600bps (short)
	121:	V.17	12000bps (long)
	122:	V.17	12000bps (short)
	145:	V.17	14400bps (long)
	146:	V.17	14400bps (short)

AT Commands Table 85