PROGRAM EDITING STEPS
SEQUENCE EDITING
These are the steps for programming the Sequences for control of the source components.
Step 1. Press and Hold the PROGRAM button.
The Program LED lights RED, the Source 2 LED lights RED, the Power/On LED Blinks RED, and the Enter IR lights RED.
Edit a Sequence for Source 2: Tap the NEXT button until the Source 2 LED lights RED, and the Sequence LED Blinks RED. Continue editing from Step 2.
Edit a Sequence for Source 3: Tap the NEXT button until the Source 3 LED lights RED, and the Sequence LED Blinks RED. Continue editing from Step 2.
Edit a Sequence for Source 4: Tap the NEXT button until the Source 4 LED lights RED, and the Sequence LED Blinks RED. Continue editing from Step 2.
Step 2. Press the keys on the Niles
Note: Enter commands and delays in the order you wish them to occur, using the Volume – or + keys to include delays (Vol – = .5 sec, Vol + = 1 sec). As many as 64 commands and/or delays may be included. The Enter IR LED blinks when it receives a command.
Step 3. Press the PROGRAM button to exit programming.
STORING TUNER PRESETS
Step 1. Select the desired AM or FM band with the Band Shift Button.
Step 2. Locate the desired station for preset, using the Station Scan Buttons.
Step 3. Press and hold the Preset Button (for more than three seconds) where you wish to store the currently tuned station.
The station display blinks when the station is stored to the Preset Button.
PROGRAM ERASING
Erasing Individual IR Commands
Step 1. Follow the same steps you would for the pro- gramming of the IR command you wish to erase.
Step 2. When the Enter IR LED lights (prompting you to teach an IR command), tap the ERASE button instead of teaching a new IR command. The command that was previously stored is now erased.
Step 3. Continue erasing or press the PROGRAM but- ton to exit programming.
Erasing Individual Sequences
Step 1. Follow the same steps you would for the pro- gramming of the sequence you wish to erase.
Step 2. When the Enter IR LED lights (prompting you to enter the IR commands and/or delays for the sequence), press the ERASE button instead of building a new sequence. The sequence that was previously stored is now erased.
Step 3. Continue programming or press the PROGRAM button to exit programming.
Erasing all IR Commands and Sequence Programming for Only One Source
Step 1. Press and Hold the PROGRAM button.
The Program LED lights RED, the Source 2 LED lights RED, the Power/On LED Blinks RED, and the Enter IR lights RED.
Erase all IR command and sequence programming for Source 2: Continue programming from Step 2.
Erase all IR command and sequence programming for Source 3: Quickly tap the NEXT button until the Source 3 LED lights RED, and the Power/On LED Blinks RED. Continue programming from Step 2.
Erase all IR command and sequence programming for Source 4: Quickly tap the NEXT button until the Source 4 LED lights RED, and the Power/On LED Blinks RED. Continue programming from Step 2.
Step 2. While the source you wish to erase is lit (2, 3, 4, or TUNER), press and hold the PROGRAM and ERASE buttons until the Power/ON, the IR Commands, and the Sequence LEDs are all blinking.
Step 3. Release the PROGRAM and ERASE buttons, and all programming for the selected source is erased.
Step 4. Continue programming, or press the PROGRAM button to exit programming.
68
