Fujitsu FMW4503TS128A01 manual Audio Jacks, IrDA Port Specifications, Active Audio Inputs

IrDA Port

The IrDA port on the Stylistic 3500 pen tablet is compliant with the Infrared Data Association (IrDA) Standard Revision 1.1. Specifications for the IrDA port on the pen tablet are given in Table 6-7.Before you can use the IrDA port, the Serial Port B Device BIOS option must be set to IrDA or FIR. See “Serial/ Parallel Port Configurations Submenu Options” on page 11 for details on BIOS options for the IrDA port.

	Table 6-7. IrDA Port Specifications
Feature	Specification
Standard supported	IrDA Standard Revision 1.1
Distance	Up to 1 meter point to point (environmental conditions affect usable range)
Conveyable wave	Infrared rays (wavelength peak 875 nm)
Signal	Send data / Receive data
Modulation/Data Rate	IrDA SIR: 9.6 - 115.2 Kbps
	IrDA FIR: 4,000.0 Kbps
Angle	0° to 15° from center of beam (30° viewing angle)

Audio Jacks

All audio jacks on the Stylistic 3500 pen tablet and Stylistic 3500 port replicator are stereo mini jacks. Some audio functions on the pen tablet are disabled when audio jacks are used. Table 6-8shows which audio inputs are disabled when inputs on the pen tablet and port replicator or mini-dock are used (enabled). Table 6-9shows which audio outputs are disabled when outputs on the pen tablet and port replicator are used.

Table 6-8. Active Audio Inputs

	Pen Tablet		Port Replicator/Mini-dock
Input Activity
	Microphone	Microphone	Microphone	Line Input
	(built-in)	Input Jack	Input Jack	Jack
Microphone On	Enabled	Plug not	Plug not	NA
(microphone built into pen tablet)		inserted	inserted
Pen tablet Microphone jack used	Disabled	Enabled	Plug not	NA
(external microphone connected)			inserted
Port replicator Microphone jack used	Disabled	Disabled	Enabled	NA
(external microphone connected)
Port replicator Line In jack used	NA	NA	NA	Enabled

NA indicates that the condition does not apply. (The condition has no effect on the given input.)

IrDA Port 59