Fujitsu FMW4503TS128A01 manual Minutes, Suspend

Table 3-14. BIOS Setup Power Savings Options (Continued)

Option	Settings	Description
Standby Timeout	Off	Standby Mode turns off various devices in the system, including
	1 Minute	the screen and the CPU until you start using the computer again.
	2 Minutes	Select the period of time the system should be inactive before it
	4 Minutes	automatically enters standby mode. When in standby mode, some
	6 Minutes	system components, including the display, are turned off to
	8 Minutes	conserve battery power. Select Off to disable the Standby Mode
	12 Minutes	Timeout feature.
	16 Minutes
Auto Suspend Timeout	Off	Determines the amount of time elapsed with no system activity
	5 Minutes	before system operation is suspended automatically.
	10 Minutes
	15 Minutes
	20 Minutes
	30 Minutes
	40 Minutes
	60 Minutes
Suspend Mode	Suspend	Determines the suspend mode used when you press the Suspend/
	Save To Disk	Resume button or when the Suspend Mode Timeout expires.
		Selecting [Suspend] also allows you to configure the Save-To-Disk
		Timeout option.
		Note: You must choose [Suspend] to use the Resume On Modem
		Ring and Resume On Time options. If [Save To Disk] is selected,
		and either Resume On Modem Ring or Resume On Time are
		enabled, the system will suspend to RAM and won’t save to disk.
Auto Save-To-Disk	Off	Determines whether the system automatically performs a
	After 1 Hour	save-to-disk operation after 1 hour in Suspend mode. To use this
		feature, the Suspend Mode option must be set to [Suspend].
Resume On Modem Ring	Off	Select [On] to configure the system to resume operation when an
	On	incoming call is detected by your modem.
		This feature will detect a modem ring on the built-in modem, a
		modem installed in a PC Card slot, or an external modem
		connected to a serial port; however, implementation of the ring
		indicator function differs between modem vendors, so this feature
		may not be supported by some third-party modems.
		To use this feature, the Suspend Mode option must be set to
		[Suspend]. If [Save To Disk] is selected, and Resume On Modem
		Ring is On, the system will suspend to RAM and won’t save to disk.
Resume On Time	Off	Select [On] to configure your system to resume operation at the
	On	time of day specified in the Resume Time field.
		To use this feature, the Suspend Mode option must be set to
		[Suspend]. If [Save To Disk] is selected, and Resume On Time is
		On, the system will suspend to RAM and won’t save to disk.
Resume Time	00:00:00	Determines time of day system will resume when the Resume On
		Time option is On. Enter the time of day in HH:MM:SS format.
		Note: system uses a 24-hour clock.
Advanced Features		Select this submenu to further refine power management BIOS
Submenu		options. See Table 3-15for more information.

BIOS Setup 22