Appendix B
AT Command Set
This Appendix contains a summary of AT commands used by the Stylistic 3500 pen tablet’s modem.
There are several things to note about this set of commands:
•Commands should be entered as ASCII characters.
•Commands should begin with “AT”, with a description of the character after the “AT”.
•The commands are not
•All commands should be followed by the “CR” character stored in “S3”.
•Spaces are counted as characters.
•Command indication can be a selected letter or number message, or it can be no return message by designation.
•Data format is as follows:
Start bit | Data bit | Parity | Stop bit |
1 | 7 | even | 1 |
|
|
|
|
1 | 7 | odd | 1 |
|
|
|
|
1 | 7 | none | 2 |
|
|
|
|
1 | 8 | none | 1 |
|
|
|
|
Note: Baud rate and data format are detected by the “AT” character.
79
