NETGEAR M4100, M7100 manual Manually Add a Host Name and an IP Address

ProSafe M4100 and M7100 Managed Switches

A screen similar to the following displays.

2.Under DNS Server Configuration, in the DNS Server field, enter 12.7.210.170.

3.Click Add.

4.In the DNS Server field, enter 219.141.140.10.

5.Click Add.

Both DNS servers now show in the DNS Server Configuration table.

Manually Add a Host Name and an IP Address

The following example shows commands to add a static host name entry to the switch so that you can use this entry to resolve the IP address. The example is shown as CLI commands and as a Web interface procedure.

CLI: Manually Add a Host Name and an IP Address

(Netgear Switch)#config

(Netgear Switch) (Config)#ip host www.netgear.com 206.82.202.46 (Netgear Switch) (Config)#ip domain-lookup

(Netgear Switch) (Config)#ping www.netgear.com

Send count=3, Receive count=3 from 206.82.202.46

Web Interface: Manually Add a Host Name and an IP Address

1.Select System > Management > DNS > Host Configuration.

Chapter 21. DNS 379