NETGEAR manual ProSafe M4100 and M7100 Managed Switches

ProSafe M4100 and M7100 Managed Switches

b.Under MVR Interface Configuration, scroll down and select the Interface 0/9 check box.

c.Enter the following information:

•In the Admin Mode list, select Enable.

•In the Type list, select source.

d.Click Apply to save the settings.

7.Configure MVR Group Membership.

a.Select Switching > VLAN > Advanced > VLAN Membership. A screen similar to the following displays:

b.In the Group IP list, select 224.1.2.3.

c.Click Unit 1. The ports display.

d.Click the gray boxes under ports 1, 5, and 7. (Port 9 is already in MVR group 224.1.2.3 because it is configured as the source port.)

e.Click Apply to save the settings.

262 Chapter 14. MVR (Multicast VLAN Registration)