ProSafe M4100 and M7100 Managed Switches

b.Under Private VLAN Host Interface Configuration, select the 1/0/4 and 1/0/5 interface check box.

c.In the Host Primary VLAN field, enter 100.

d.In the Host Secondary VLAN field, enter 102.

e.Click Apply to save the settings.

Map Private-VLAN Promiscuous Port

The example is shown as CLI commands and as a Web interface procedure.

CLI: Map Private-VLAN Promiscuous Port

Use the following commands to map private-VLAN promiscuous port 1/0/1 to a primary VLAN (100) and to secondary VLANs (101-102).

(Netgear Switch)

#config

(Netgear Switch)

(Config)#interface 1/0/1

(Netgear Switch)

(Interface 1/0/1)#switchport private-vlan mapping 100 101-102

(Netgear Switch)

(Interface 1/0/1)#end

 

 

Web Interface: Map Private-VLAN Promiscuous Port

1.1.Map private-VLAN promiscuous port 1/0/1 to a primary VLAN (100) and to selected secondary VLANs (101-102).

a.Select Security > Traffic Control > Private VLAN > Private VLAN Promiscuous Interface Configuration. A screen similar to the following displays.

52 Chapter 2. VLANs

Page 52
Image 52
NETGEAR M7100, M4100 manual CLI Map Private-VLAN Promiscuous Port, Web Interface Map Private-VLAN Promiscuous Port