ProSafe M4100 and M7100 Managed Switches

Web Interface: Configure an Inter-area Router

1.Enable IP routing on the switch.

a. Select Routing > IP > Basic > IP Configuration. A screen similar to the following displays.

b.For Routing Mode, select the Enable radio button.

c.Click Apply to save the settings.

2.Assign IP address 192.150.2.1 to port 1/0/2.

a.Select Routing > IP > Advanced > IP Interface Configuration. A screen similar to the following displays.

b.Scroll down and select the interface 1/0/2 check box. Now 1/0/2 appears in the Interface field at the top.

c.Enter the following information:

•In the IP Address field, enter 192.150.2.1.

•In the Subnet Mask field, enter 255.255.255.0.

•In the Administrative Mode field, select Enable.

d.Click Apply to save the settings.

3.Assign IP address 192.150.3.1 to port 1/0/3:

a.Select Routing > IP > Advanced > IP Interface Configuration.

Chapter 7. OSPF 89

Page 88 Page 90
Page 89
Image 89
NETGEAR M4100, M7100 Web Interface Configure an Inter-area Router, Select Routing IP Advanced IP Interface Configuration
Page 88 Page 90
Top Page Image Contents