NETGEAR manual ProSafe M4100 and M7100 Managed Switches

ProSafe M4100 and M7100 Managed Switches

b.Click Add, and a screen similar to the following displays.

c.In the Rule ID field, enter 2.

d.Select the Permit radio button.

e.In the Match Every field, select True.

f.Click Apply.

At the end of this configuration a screen similar to the following displays.

4.Bind the ACL with interface 1/0/1.

a. Select Security > ACL > Advanced > IP Binding Configuration. A screen similar to the following displays.

b.In the Sequence Number field, enter 1.

c.In the Port Selection Table, click Unit 1 to display all the ports for the device.

d.Select the Port 1 check box.

e.Click Apply.

Chapter 10. ACLs 177