NETGEAR M4100, M7100 manual Enter the following CLI commands

ProSafe M4100 and M7100 Managed Switches

CLI: Configure One-Way Access Using a TCP Flag in ACL Commands

1.Enter the following CLI commands.

(Netgear Switch) #vlan database (Netgear Switch) (Vlan)#vlan 24 (Netgear Switch) (Vlan)#vlan routing 24 (Netgear Switch) (Vlan)#exit (Netgear Switch) #config

(Netgear Switch) (Config)#interface 1/0/24

(Netgear Switch) (Interface 1/0/24)#vlan participation include 24 (Netgear Switch) (Interface 1/0/24)#vlan pvid 24

(Netgear Switch) (Interface 1/0/24)#exit

(Netgear Switch) (Config)#interface vlan 24 (Netgear Switch) (Interface-vlan 24)#routing

(Netgear Switch) (Interface-vlan 24)#ip address 192.168.24.1 255.255.255.0 (Netgear Switch) (Interface-vlan 24)#exit

(Netgear Switch) (Config)#exit

2.Create VLAN 48, add port 1/0/48 to it, and assign IP address 192.168.48.1 to it.

(Netgear Switch) #vlan database (Netgear Switch) (Vlan)#vlan 48 (Netgear Switch) (Vlan)#vlan routing 48 (Netgear Switch) (Vlan)#exit (Netgear Switch) #config

(Netgear Switch) (Config)#interface 1/0/48

(Netgear Switch) (Interface 1/0/48)#vlan participation include 48 (Netgear Switch) (Interface 1/0/48)#vlan pvid 48

(Netgear Switch) (Interface 1/0/48)#exit

(Netgear Switch) (Config)#vlan interface vlan 48 (Netgear Switch) (Interface-vlan 48)#routing

(Netgear Switch) (Interface-vlan 48)#ip address 192.168.48.1 255.255.255.0 (Netgear Switch) (Interface-vlan 48)#exit

(Netgear Switch) (Config)#exit

Chapter 10. ACLs 159