NETGEAR M7100, M4100 manual External Multicast Router, CLI Show mac-address-table igmpsnooping

ProSafe M4100 and M7100 Managed Switches

CLI: Show mac-address-table igmpsnooping

(Netgear Switch) #show mac-address-table igmpsnooping ?

<cr>	Press Enter to execute the command.
(Netgear Switch) #show mac-address-table igmpsnooping
	Type	Description	Interfaces
-----------------------	-------	--------------	-----------
00:01:01:00:5E:00:01:16	Dynamic	Network Assist	Fwd: 1/0/47
00:01:01:00:5E:00:01:18	Dynamic	Network Assist	Fwd: 1/0/47
00:01:01:00:5E:37:96:D0	Dynamic	Network Assist	Fwd: 1/0/47
00:01:01:00:5E:7F:FF:FA	Dynamic	Network Assist	Fwd: 1/0/47
00:01:01:00:5E:7F:FF:FE	Dynamic	Network Assist	Fwd: 1/0/47

Web Interface: Show mac-address-table igmpsnooping

Select Switching > Multicast > IGMP Snooping Table. A screen similar to the following displays.

External Multicast Router

The example is shown as CLI commands and as a Web interface procedure.

CLI: Configure the Switch with an External Multicast Router

This example configures the interface as the one the multicast router is attached to. All IGMP packets snooped by the switch is forwarded to the multicast router reachable from this interface.

(Netgear Switch)(Interface 1/0/3)# set igmp mrouter interface

248 Chapter 13. IGMP Snooping and Querier