NETGEAR M7100, M4100 manual IP Address field, enter Subnet Mask field, enter

ProSafe M4100 and M7100 Managed Switches

a.Select Routing > IPv6 > Basic > Global Configuration. A screen similar to the following displays.

b.For IPv6 Unicast Routing, select the Enable radio button.

c.For IPv6 Forwarding, select the Enable radio button.

d.Click Apply.

3.Create a routing interface and assign an IP address to it.

a.Select Routing > IP > Advanced > IP Interface Configuration. A screen similar to the following displays.

b.Under IP Interface Configuration, scroll down and select the Port 1/0/13 check box. Now 1/0/1 appears in the Port field at the top.

•In the IP Address field, enter 192.168.1.2.

•In the Subnet Mask field, enter 255.255.255.0.

•In the Routing Mode field, select Enable.

c.Click Apply.

4.Create a 6-in-4 tunnel interface.

420 Chapter 26. Tunnel