NETGEAR M4100 Time-Based Sampling of Counters with sFlow, View the polling port configurations

ProSafe M4100 and M7100 Managed Switches

Time-Based Sampling of Counters with sFlow

CLI: Configure Time-Based Sampling of Counters with sFlow

1.Configure the sampling port sFlow receiver index, and polling interval. You need to repeat this for all the ports to be polled.

(Netgear Switch) (Config)# interface 1/0/1 (Netgear Switch) (Interface 1/0/1)# sflow poller 1

(Netgear Switch) (Interface 1/0/1)# sflow poller interval 300

2.View the polling port configurations.

(GSM7328S) #show sflow pollers
Poller	Receiver	Poller
Data Source	Index	Interval
-----------	---------	---------
1/0/1	1	300

Web Interface: Configure Time-Based Sampling of Counters with sFlow

1.Configure thesampling ports sFlow receiver index, and polling interval.

a.Select Monitoring > sFlow > Advanced > sFlow Interface Configuration.

b.Select the Interface 1/0/1 check box.

c.In the Poller Interval field, enter 300. A screen similar to the following displays.

d.Click Apply.

Chapter 20. SNMP 377