NETGEAR M7100, M4100 manual PIM-SM on Switch B, Netgear Switch#configure

ProSafe M4100 and M7100 Managed Switches

(Netgear Switch) (Interface 1/0/1)#ip pim sparse (Netgear Switch) (Interface 1/0/1)#exit

(Netgear Switch) (Config)#interface 1/0/9 (Netgear Switch) (Interface 1/0/9)#routing

(Netgear Switch) (Interface 1/0/9)#ip address 192.168.3.1 255.255.255.0 (Netgear Switch) (Interface 1/0/9)#ip rip

(Netgear Switch) (Interface 1/0/9)#ip pim sparse (Netgear Switch) (Interface 1/0/9)#exit

(Netgear Switch) (Config)#interface 1/0/13 (Netgear Switch) (Interface 1/0/13)#routing

(Netgear Switch) (Interface 1/0/13)#ip address 192.168.1.2 255.255.255.0 (Netgear Switch) (Interface 1/0/13)#ip rip

(Netgear Switch) (Interface 1/0/13)#ip pim sparse (Netgear Switch) (Interface 1/0/1)#exit

PIM-SM on Switch B

1.Enable the switch to advertise itself as a PIM candidate rendezvous point (RP) to the bootstrap router (BSR).

(Netgear Switch)#configure

(Netgear Switch) (Config)#ip routing (Netgear Switch) (Config)#ip pim sparse (Netgear Switch) (Config)#ip multicast

(Netgear Switch) (Config)#ip pim sparse rp-candidate interface 1/0/11 225.1.1.1 255.255.255.0

462 Chapter 28. PIM