NETGEAR M4100, M7100 CLI Configure the Maximum Rate of Dhcp Messages, View the rate configured

ProSafe M4100 and M7100 Managed Switches

CLI: Configure the Maximum Rate of DHCP Messages

1.Control the maximum rate of DHCP messages.

(Netgear Switch) (Interface 1/0/2)# ip dhcp snooping limit rate 5

2.View the rate configured.

(GSM7328S) #show ip dhcp snooping interfaces 1/0/2

Interface	Trust State	Rate Limit	Burst Interval
		(pps)	(seconds)
----------	-------------	-------------	---------------
1/0/2	No	5	1

Web Interface: Configure the Maximum Rate of DHCP Messages

1.Select Security > Control > DHCP Snooping > Interface Configuration. A screen similar to the following displays:

2.Select the interface, fill in the Rate Limit (pps) field, and then click Apply. The screen shows the new rate limit for the interface.

Chapter 15. Security Management 311