NETGEAR M7100 Enable Igmp on 1/0/24, PIM-DM builds the multicast routes table on each switch

ProSafe M4100 and M7100 Managed Switches

2.Enable IGMP on 1/0/24.

(Netgear Switch) (Config)#interface 1/0/24 (Netgear Switch) (Interface 1/0/24)#routing (Netgear Switch) (Interface 1/0/24)#ip pim dense (Netgear Switch) (Interface 1/0/24)#ip igmp (Netgear Switch) (Interface 1/0/24)#ip rip

(Netgear Switch) (Interface 1/0/24)#ip address 192.168.4.1 255.255.255.0 (Netgear Switch) (Interface 1/0/24)#exit

3.PIM-DM builds the multicast routes table on each switch.

(A) #show ip mcast mroute summary
	Multicast Route Table Summary
			Incoming	Outgoing
Source IP	Group IP	Protocol	Interface	Interface List
-----------	----------	----------	---------	---------------
192.168.1.1	225.1.1.1	PIMDM	1/0/13	1/0/1
(B) #show ip mcast mroute summary
	Multicast Route Table Summary
			Incoming	Outgoing
Source IP	Group IP	Protocol	Interface	Interface List
-----------	---------	----------	---------	---------------
192.168.1.1	225.1.1.1	PIMDM	1/0/10
(C) #show ip mcast mroute summary
	Multicast Route Table Summary
			Incoming	Outgoing
Source IP	Group IP	Protocol	Interface	Interface List
-----------	---------	--------	---------	---------------
192.168.1.1	225.1.1.1	PIMDM	1/0/21
(D) #show ip mcast mroute summary
	Multicast	Route Table Summary
			Incoming	Outgoing
Source IP	Group IP	Protocol	Interface	Interface List
----------	---------	--------	----------	---------------
192.168.1.1	225.1.1.1	PIMDM	7/0/21	7/0/24

440 Chapter 28. PIM