User’s Manual
5.7.5NAS Device
The DVR can connect Network Attached Storage (NAS) devices to expand the size of the database. Before connecting the NAS device, the DVR has to be shut down. After the NAS device is connected and the DVR is rebooted, access <Database Setup> Æ <NAS Devices> and the menu will be displayed as below. The items <Active> and <Action> is the same as in Internal / External Disks menu.
| NAS Devices |
|
|
Device Name | Active | Detail | Action |
xxxxxxxxxxx | Yes | Yes | None |
Detail
Set this item to <Yes> and the detailed information of the NAS device will be shown on the monitor. Refer to the following for an example. The information is “read only”.
|
| NAS Detailed Info |
|
| |||
|
| Device Name: xxxxxxxxxxx |
|
| |||
|
| IP: 192.168.50.2 |
|
| |||
|
|
|
| Port: 8080 |
|
| |
|
| Netmask: 255.255.255.0 |
|
| |||
|
|
| Storage Status |
|
|
| |
|
|
|
|
|
| ||
| Index | Status | Free Size | Total Size | |||
5.8Configuration
The Configuration menu can be used to restore the default factory settings, import and export configurations. Select <Configuration> from the Main menu and press ENTER. The following menu is displayed. Items in this menu are described in the following subsections.
| Configuration |
Load Factory Default | No |
Import Config |
|
Export Config |
|
Import Deterrent |
|
Export Deterrent |
|
Boot Log | On |
Operation Log |
117 | |
SPECO TECHNOLOGIES 07/10 |
|
