Samsung DVR-4TH, DVR-16TH, DVR-8TH user manual Activated, Status

User’s Manual

Otherwise, the <Device Setup> setting is completed.

NOTE: After changing any item under Device Setup menu, users MUST set <Apply> to <Yes> to apply the changes, or the settings will remain unchanged.

5.3.2.8Activated

Access this item and select <Yes> to activate the connection to the IP camera. To deactivate the connection, select <No>

NOTE: Once the connection to the IP camera is activated, menu items <Hostname/IP>, <Model>, <Connection Setup> will be grayed out and cannot be accessed.

5.3.2.9Status

After the connection to the IP camera is activated, users can check the connection status. The menu will be shown as below

	Status
Model	****
Resolution	720*480
PPS	10
Bandwidth	20 KB/Sec
Pkg. lost rate	0.1%

The information shown on the monitor is “ready only”.

5.3.2.10Copy Settings

This item allows the user to copy the settings set on the current selected camera to any other connected cameras. Enter this menu and select one or more cameras to copy the settings. Then select <CONFIRM> to apply the settings.

COPY TO:

10 11

Copy Settings

12 13 14

15

16

SELECT ALLDESELECT ALLCONFIRMCANCEL

98	DVR-4TH/8TH/16TH Series
	SPECO TECHNOLOGIES 07/10