User’s Manual
3.General System Setup
Before operating the DVR-4TH/ 8TH/ 16TH series unit, some general configuration should be setup in advance. The following subsections will introduce functional keys on the front panel and general configuration of the DVR-4TH/ 8TH/ 16TH series unit.
The regularly displayed OSD information and its positions are shown in the following figure. The title of the channel is displayed on the upper left-hand corner of the window, either in full screen mode or in multiple-channel mode. The current operating mode, including Call mode, Dome Control mode, Playback mode, Freeze mode and Sequence mode, is displayed in the status bar located on the lower left-hand corner of the screen. The date/ time information is displayed on the lower right-hand corner of the screen.
Ch1
2009/10/22 PM 04:31:55
3.1Front Panel Introduction
The functional keys on the unit’s front panel enable users to control the unit and preset programmable settings.
3.1.1LED Definition
The LED indication lights of the DVR-4TH/ 8TH/ 16TH series unit on the front panel are described as follows.
20 | DVR-4TH/8TH/16TH Series |
| SPECO TECHNOLOGIES 07/10 |
