HP K5400 Network Printer Setup Utility Mac OS, HP Web Jetadmin software, Printer Settings panel

Information and Support panel

•Supplies Status: Shows the information about currently installed printheads and ink cartridges.

•Supply Info: Shows the ink cartridge replacement options.

•Device Information: Displays information about the model and serial number. Also allows you to print the self-test diagnostic page of the device. This page contains information about the device and the supplies. For more information, see Understand the self-test diagnostic page.

•Print Quality Diagnostics: Allows you to diagnose issues affecting the print quality of the device. For more information, see To print the print quality diagnostic page.

•Clean: Guides you through cleaning the printheads. For more information, see To clean the printheads.

•Align: Guides you through aligning the printheads. For more information, see To align the printheads.

•Calibrate Linefeed: Allows you to perform linefeed calibration. For more information, see To calibrate the linefeed.

•Control Panel Language: Allows you to set the language used to print reports such as the self-test diagnostic page.

•HP Support: Gain access to HP Web site where you can find support for the device, register the device, and find information about returning and recycling used printing supplies.

Printer Settings panel

•Trays Configuration: Set the default media type and size for a tray, and set the tray priority. For more information, see Configure trays.

•Additional Settings: Launch the embedded Web server to change network settings. Configure IP settings for network connectivity.

Network Printer Setup Utility (Mac OS)

This tool allows you to configure network settings for the device. You can configure wireless settings such as network location name and wireless mode, and wired settings such as TCP/IP address, router, and subnet mask.

To open the Network Printer Setup Utility

1.From the Finder, select Computer from the Go menu.

2.Select Library, and then select Printers.

3.Select hp, select Utilities, and then select Network Printer Setup Utility.

4.Follow the onscreen instructions to configure network settings for the device.

HP Web Jetadmin software

The HP Web Jetadmin software is a Web-based management solution for remotely installing, configuring (both individually or in batch mode), monitoring status (including levels for supplies), conducting remote diagnostics, and troubleshooting a wide variety of HP and non-HP network peripherals.

Use device management tools 33