HP K5400 Install the accessories, Install the duplexer, Install Tray, To install the duplexer

2 Install the accessories

This section contains the following topics:

•Install the duplexer

•Install Tray 2

•Turn on accessories in the print driver

Install the duplexer

NOTE: This feature is available with some models of the device. For ordering information, see Accessories.

You can print on both sides of a sheet of paper automatically when the optional automatic two-sided printing accessory (duplexer) is installed. For information on using the duplexer, see Print on both sides (duplexing).

To install the duplexer

1.Push the buttons on the rear access panel and remove the panel from the device.

2.Slide the duplexer into the device until the unit locks into place. Do not press the buttons on either side of the duplexer when installing the unit; use them only for removing the unit from the device.

Install Tray 2

NOTE: This feature is available with some models of the device. For ordering information, see Accessories.

Install the accessories 9