(continued)
Light description/Light pattern | Explanation and | |
| recommended action | |
The Power light blinks. | The device is turning | |
| on or off, or is | |
| processing a print job. | |
| No action is required. | |
| The device is pausing | |
| for the ink to dry. | |
| Wait for the ink to dry. | |
The Power light and the Resume light blink. | Print media is jammed | |
| in the device. | |
| Remove all media from | |
| the output tray. Locate | |
| and clear the jam. For | |
| more information, see | |
| Clear a jam in the | |
| device. | |
| The device carriage | |
| has stalled. | |
| • | Open the top |
|
| cover and remove |
|
| any obstructions |
|
| (such as jammed |
|
| media). |
| • | Press (Resume |
|
| button) to continue |
|
| printing. |
| • | If the error |
persists, turn the device off, and then on again.
The Power light is on and the Resume light blinks.
The Power light and the Resume light are on.
The device is out of paper.
Load paper and press 
(Resume button).
A cover is not closed completely.
Make sure all covers are completely closed.
The rear access panel or duplex unit is missing, or is not inserted completely.
Make sure the rear access panel or the duplex unit is inserted completely at the back of the device. (These features are available with some models.)
Interpreting | 71 |
